If your Hikvision IP camera is facing issues or the live feed is distorted, sometimes a simple reset can fix this. Of course, that begs the question of how to reset Hikvision IP camera. There are several different ways to achieve this, but keep in mind that regardless of how you reset your camera, it will default to factory settings. So you will need to set up any custom configurations again to return them to their previous state.
Why Is Resetting A Hikvision IP Camera Necessary?
Due to the issue of how a hard reset changes your settings to factory settings, it may seem unnecessary. However, there are times when prompting a hard reset is the only option you have. A common scenario where you need to reset the camera is if you have forgotten your password. Without your password, you cannot access any of the functions of the camera, and you must reset it if you want to continue using it.
The other reason to reset it is that sometimes the camera can freeze or become inoperable. Some errors can pop up during use. At these moments, a quick reset can fix the issue. Although this isn’t common, it can happen for older models of cameras. If the problems with your camera persist after a reset, it might be time for a replacement.
How To Reset Hikvision IP Camera | Different Methods
There are several ways to reset a Hikvision IP Camera. We’ll cover each of them one by one below:
The first and easiest way to do this is to simply press and hold the reset button. Most models do come with a reset button, and you should use the instruction manual to help locate the reset button. They are usually push-down buttons that you can find near the bottom or memory card slots. To reset the camera using this method, follow the steps below:
- Locate the reset button on your model
- Disconnect the power supply to the camera
- Hold down the reset button until the camera shuts off or the display goes black
- After that, connect the power supply back to the camera
- Keep holding down the reset button as you make the connection
- Release the button. In case the camera doesn’t boot up on its own, you can turn it on
At this point, in some models, you’ll get booted to the configuration screen, where you can set your password and revert to previous settings. Other versions might ask for a password. The default password for IP cameras is usually 12345, so you can try that out if you are prompted with a password.
Using The Web Browser For A Rest
Some models do not have a reset button, and for these models, the first method is unavailable for use. Your next option is to make use of a web browser to reset it, but you will need to know the password for this method. So this method is mostly used to fix bugs or errors with the camera.
To do this, follow the steps as illustrated:
- In the web browser of your choice, type the IP of your camera on the URL bar (the default IP starts with 22.214.171.124)
- A menu should appear on the left where you can look for the maintenance tab
- Click the maintenance tab and then switch to the configuration bar at the top
- Scroll down, and you should see an option to restore the default settings
- Click that option, and you will be given a final prompt
- Press yes, and the camera will default to factory settings
- Access the camera with the password
Upon resetting you may be given the option to update firmware on your camera. This is important as updated firmware fixes many issues. It also protects against hacking.
Resetting Hik Connect App
The final option is to download the Hik Connect App on your mobile. After installing and connecting your mobile to the respective Hikvision Ip camera, you can simply force a reset from the app. This is the easiest way to reset your camera so long as the app supports the model.
Hope we’ve been able to show how to reset Hikvision Ip Camera. To summarize, there are 3 ways to reset, with the easiest being the Hik Connect app on your mobile. However, in case it is not compatible, you will need to resort to the other methods.